Hint: Use 'j' and 'k' keys
to move up and down

Amateur Human Cyclocrossist @capitalcrewbike

Clement MSO’s installed on the Crux

Finally going to test out the MSO’s on some mtb singletrack tonight. They are 700x40’s I know Mr. @cxhairs had laughs about them, but I have a feeling he will want some soon too! These look like thtey will be awesome for the thick gravel and smaller roots.  The sidewall says to run them from 55-90 psi. I went ahead and pumped them to 80 and I am sure I will let air out down to 40 psi on the single track tonight. 

Here are some pictures of rear tire clearance on my Specialized Crux. 


Call Bike Doctor of Waldorf to order yours! 

http://bikedoctorwaldorf.com/

image

image

image

#cyclocross payday! #winchester #applecx #applecross Thanks @protestedgear @winchesterwheelmen and everyone else that made the race happen!

#cyclocross payday! #winchester #applecx #applecross Thanks @protestedgear @winchesterwheelmen and everyone else that made the race happen!

Another 2/3/4 win today at #c3cx13 #charmcity thanks to @maccx1 and the support from @bikedoctorwaldorf @jbvcoaching @spyoptic @cxhairs could not have done it without @palmtree23 ! #cyclocross #catuptime

Another 2/3/4 win today at #c3cx13 #charmcity thanks to @maccx1 and the support from @bikedoctorwaldorf @jbvcoaching @spyoptic @cxhairs could not have done it without @palmtree23 ! #cyclocross #catuptime

Tagged with:  #c3cx13  #cyclocross  #charmcity  #catuptime

Built up a set of the @iamspecialized carbon disc tubulars for a friend. 1460 grams before gluing with no rotors/skewers. @clementcycling PDX look sexy!!! Had to put them on my rig for some photos! 

Installing a @sram @quarq magnet by #Larry- First bit, sand up the frame a little. I used a hacksaw blade gently to make some burrs, this way the glue has something to bite onto (remember your frame comes with a fancy smooth finish)! Clean everything with rubbing alcohol.  Mix epoxy/putty. Stick magnet on. Tape her up, install Quarq and check for cadence before the epoxy sets. Now let it sit for the appropriate time the epoxy manufacture recommends and GO PUT DOWN SOME  SICCK WAATTTS!!! Thanks to www.bikedoctorwaldorf.com for my quarq and help with this! 

#cyclocross Last lap day 2 @maccx1 #nittanycx #nittanycross #justinlindine @yotwells @stephenthyde

Holding onto 1st place at #nittanycx #nittanycross 2013-Cat 2/3/4 Day 2

dframent said: when i saw you, you were talkin to people and i didn't wanna interrupt. i tried to find you later, but never saw you again. darn! i did not race, i JUST bought my cross bike like a month ago. maybe next season :) i'd really like to. after watching nittany i decided that i had to. haha. let's exchange info. maybe next time we can coordinate some hugs and whatnot. and i'll give you snacks. because that's what i do apparently. haha

haha cool! Were you with Roz? I was checking out a bike she was telling me a friend just built by some van she was in… 

First win of the season in the books! Two great days of racing at @maccx1 #nittanycross #nittanycx cat2/3/4 Thanks for all the support from my girlfriend Honey @palmtree23, www.bikedoctorwaldorf.com , www.spyoptic.com , www.madalchemy.com www.cyclocrossbook.com www.jbvcoaching.com www.wolftoothcycling.com

First win of the season in the books! Two great days of racing at @maccx1 #nittanycross #nittanycx cat2/3/4 Thanks for all the support from my girlfriend Honey @palmtree23, www.bikedoctorwaldorf.com , www.spyoptic.com , www.madalchemy.com www.cyclocrossbook.com www.jbvcoaching.com www.wolftoothcycling.com